Difficulty | Suggestions |
Cannot install software or print. | Run the Repair |
| and reinstall the software. |
|
|
‘Device Busy’ | Make sure the machine is not showing an error message on the LCD. |
|
|
Cannot print images from | To use FaceFilter Studio, you must install the FaceFilter Studio application from |
FaceFilter Studio. | the |
| Quick Setup Guide. |
| Also, before you start FaceFilter Studio for the first time, you must make sure your |
| Brother machine is turned On, and connected to your computer. This will allow you |
| to access all the functions of FaceFilter Studio. |
|
|
Difficulty | Suggestions | |
Removable Disk does not work | 1 | Have you installed the Windows® 2000 update? If not, do the following: |
correctly. |
| 1) Unplug the USB cable. |
|
| |
|
| 2) Install the Windows® 2000 update using one of the following methods. |
|
| Install |
|
| Guide.) |
|
| Download the latest service pack from the Microsoft Web site. |
|
| 3) Wait about 1 minute after you restart the PC, and then connect the USB |
|
| cable. |
| 2 | Take out the memory card or USB Flash memory drive and put it back in |
|
| again. |
| 3 | If you have tried ‘Eject’ from within Windows®, take out the memory card or |
|
| USB Flash memory drive before you continue. |
| 4 | If an error message appears when you try to eject the memory card or USB |
|
| Flash memory drive, it means the card is being accessed. Wait a while and |
|
| then try again. |
| 5 | If all of the above do not work, turn off your PC and machine, and then turn |
|
| them on again. (You will have to unplug the power cord of the machine to turn |
|
| it off.) |
|
| |
Cannot access Removable Disk | Make sure that you have correctly inserted the memory card or USB Flash | |
from Desktop icon. | memory drive. | |
|
| |
Part of my photo is missing when | Make sure that Borderless Printing and Cropping are turned off. (See Borderless | |
printed. | ||
|
|
|
152