Checking the ink volume

Although an ink volume icon appears on the LCD, you can use the ink menu to see a large graph showing the ink that is left in each cartridge.

a Press .

b Press Ink Volume.

The LCD shows the ink volume.

c Press Stop/Exit.

Note

You can check the ink volume from your computer. (See Printing for Windows® or

Printing and Faxing for Macintosh® in the Software User’s Guide on the CD-ROM.)

Machine Information

Checking the serial number

You can see the machine’s serial number on the LCD.

a Press MENU.

b Press a or b to display Machine Info.

c Press Machine Info.

d Press Stop/Exit.

Packing and shipping the machine

When you transport the machine, use the packing materials that came with your machine. Follow the instructions below to properly pack your machine. Damage caused to your machine during transit is not covered by your warranty.

IMPORTANT

It is important to allow the machine to ‘park’ the print head after a print job. Listen carefully to the machine before unplugging it to make sure that all mechanical noise has stopped. Not allowing the machine to finish this parking process may lead to print problems and possible damage to the print head.

a Open the ink cartridge cover.

b Press the lock release lever to release the ink cartridge and take out all the ink cartridges. (See Replacing the ink cartridges on page 165.)

c Install the green protective part and then close the ink cartridge cover.

174