Printing photos from a memory card or USB Flash memory drive

Setting your changes as a new default

You can save the print settings you use most often by setting them as the default settings. These settings will stay until you change them again.

a Press your new setting.

Repeat this step for each setting you want to change.

b After changing the last setting, press

aor b to choose Set New Default.

c Press Set New Default. d Press Yes to confirm. e Press Stop/Exit.

Restoring all settings to the factory settings

You can restore all the settings you have changed to the factory settings. These settings will stay until you change them again.

a Press Print Setting.

b Press a or b to display Factory Reset.

c Press Factory Reset. d Press Yes to confirm. e Press Stop/Exit.

Scan to a memory card or USB Flash memory drive

Entering Scan mode

When you want to scan to a memory card or USB Flash memory drive, press

(Scan).

The LCD shows:

SCAN

Scan to

Scan to

Scan to

E-mail

Image

OCR

Scan to

Scan to

Scan to

File

Media

FTP

Press Scan to Media.

If you are not connected to your computer only the Scan to Media selection is available on the LCD.

(See Scanning for Windows® or Macintosh® in the Software User’s Guide on the CD-ROM for details about the other menu options.)

12

119