When you send a fax automatically, by default your machine will wait for a fixed amount of time before it starts to dial the number. By changing the Dial Tone setting to Detection you can make your machine dial as soon as it detects a dial tone. This setting can save a small amount of time when sending a fax to many different numbers. If you change the setting and start having problems with dialling you should change back to the factory No Detection setting.
a Press MENU.
b Press a or b to display Initial Setup.
c Press Initial Setup.
d Press a or b to display Dial Tone. e Press Dial Tone.
f Press Detection or No Detection. g Press Stop/Exit.
154
If you are having problems sending or receiving a fax due to possible interference on the telephone line, you can change the compatibility setting, which reduces the modem speed to minimise errors.
a b c
d Press a or b to display Miscellaneous.
e Press Miscellaneous. f Press Compatibility.
g Press High, Normal or Basic(for VoIP).
Basic(for VoIP) cuts the modem speed to 9600 bps. Unless interference is a recurring problem on your telephone line, you may prefer to use it only when needed.
Normal sets the modem speed at 14400 bps.
High increases the modem speed to 33600 bps. (factory setting)
h Press Stop/Exit.
Note
When you change the compatibility to Basic(for VoIP), the ECM feature is only available for colour fax sending.