Chapter 11

Skew Adjustment (MFC-6490CW only)

If your copy is scanned skewed, your machine can correct the data automatically. This setting is only available when using the scanner glass and Enlarge/Reduce is set to 100%.

a Press (Copy). b Load your document.

c Enter the number of copies you want. d Press a or b to choose Skew Adjustment.

e Press d or c to choose Auto (or Off). Press OK.

f If you do not want to change additional settings, press Black Start or Color Start.

Note

Page Layout, Enlarge/Reduce, Book Copy and Watermark Copy are not available with Skew Adjustment.

You cannot use this setting with Ledger, A3 or paper that is smaller than

2.52 in. × 3.58 in. (64 mm × 91 mm).

This setting is only available for paper that is rectangular or square.

You cannot use this setting with a thick document, such as a book.

Skew Adjustment is only available if the document is skewed by less than 3 degrees.

Book Copy

Book copy corrects dark borders and skew when copying from the scanner glass. Your machine can correct the data automatically or you can make specific corrections.

a Press (Copy). b Load your document.

c Enter the number of copies you want. d Press a or b to choose Book Copy. e Do one of the following:

If you want to correct the data yourself, press d or c to choose

On(Preview).

Press Black Start or Color Start and go to step f.

If you want the machine to correct the data automatically, press d or c to choose On and go to step g.

f Adjust the skewed data using # or l. Remove the shadows by using a or b.

g If you have finished making corrections, press Black Start or Color Start.

Note

Book Copy is not available with Page Layout, Sort, Fit to Page, Skew Adjustment and Watermark Copy.

100