Press Menu.
Press Menu.

Chapter 4

Changing the password

a

b Press a or b to choose General Setup. Press OK.

c Press a or b to choose Function Lock. Press OK.

d Press a or b to choose Set Password. Press OK.

e Enter the registered four-digit password. Press OK.

f Enter a four-digit number for the new password.

Press OK.

g When the LCD shows Verify:,

re-enter the new password. Press OK.

h Press Stop/Exit.

Setting up and changing the Public user

You can set up the Public user. Public users do not need to enter a password. You can set up one Public user.

a

b Press a or b to choose General Setup. Press OK.

c Press a or b to choose Function Lock. Press OK.

d Press a or b to choose Setup User. Press OK.

e Enter the administrator password. Press OK.

f Press a or b to choose Public. Press OK.

g Do one of the following:

To set up the Public user, press

d or cto choose Enable or Disable for Fax Tx. After you have set Fax Tx, press a or b to choose the settings for Fax Rx, Copy(Color), Copy(B&W), Scan, Print and PCC by repeating this step.

Press OK.

To change the Public user settings, press a or b to choose the setting you want to change.

Press d or c to choose Enable or

Disable.

Repeat this step until you finish changing settings.

Press OK.

Note

You can set PC Print and PhotoCapture Print for only the Public user. If you disable PC Print and PhotoCapture Print for the Public user it will also disable PC Print and PhotoCapture Print for all restricted users.

h Press Stop/Exit.

34