Chapter 3
Tray use in Copy modeYou can change the default tray the machine will use for printing copies.
To change the default setting follow the instructions below:
a
b Press a or b to choose General Setup. Press OK.
c Press a or b to choose Tray Setting. Press OK.
d Press a or b to choose Tray Use:Copy.
e Press d or c to choose Tray#1 or Tray#2.
Press OK.
f Press Stop/Exit.
Note
You can change the paper size and tray selection temporarily for the next copy. (See Paper Size on page 99 and Tray Select
You can change the default tray the machine will use for printing received faxes.
Auto Select will allow your machine to take paper from Tray #1 first, or from Tray #2 if:
Tray #1 is out of paper.
Tray #2 is set to a different paper size that is more suitable for the received faxes.
Both trays are using the same size paper and Tray #1 is not set to use plain paper.
a
b Press a or b to choose General Setup. Press OK.
c Press a or b to choose Tray Setting. Press OK.
d Press a or b to choose Tray Use:Fax. e Press d or c to choose Tray#1,
Tray#2 or Auto Select.
Press OK.
f Press Stop/Exit.
28