Chapter 11
Using a scanned paper document as your watermarka Press (Copy).
b Enter the number of copies you want.
c Press a or b to choose Watermark Copy. Press OK.
d
e Press a or b to choose Current Setting. Press OK.
f Press a or b to choose Scan. Press OK. Then place the page that you want to use for the watermark on the scanner glass.
g Press Black Start or Color Start.
h Take out the watermark document you scanned and load the document you want to copy.
i Press d or c to change the Transparency of the watermark. Press OK.
j Press Black Start or Color Start.
Note
You cannot enlarge or reduce the scanned watermark.
Setting your changes as the new default
You can save the copy settings for Quality, Enlarge/Reduce, Tray Select (MFC- 6490CW only), Brightness, Contrast, Page Layout or Skew Adjustment
a Press (Copy).
b Press a or b to choose your new setting. Press OK.
Repeat this step for each setting you want to change.
c After changing the last setting, press
aor b to choose Set New Default. Press OK.
d Press 1 to choose Yes. e Press Stop/Exit.
Restoring all settings to the factory settings
You can restore all the settings you have changed to the factory settings. These settings will stay until you change them again.
a Press (Copy).
b Press a or b to choose Factory Reset. Press OK.
c Press 1 to choose Yes. d Press Stop/Exit.
102