d Turn the green knob on the protective yellow cap clockwise until clicks to release the vaccum seal, then remove the cap (1).

f Gently push the ink cartridge in until it clicks, and then close the ink cartridge cover.

1

e Each color has its own correct position. Insert the ink cartridge in the direction of the arrow on the label.

Y

C

BK

g The machine will automatically reset the ink dot counter.

Note

If you replaced an ink cartridge, for example Black, the LCD may ask you to verify that it was a brand new one (for

example, Did You Change Black). For each new cartridge you installed, press 1 (Yes) to automatically reset the ink dot counter for that color. If the ink cartridge you installed is not a brand new one, be sure to press 2 (No).

If the LCD shows No Cartridge or Cannot Detect after you install the ink cartridges, check that the ink cartridges are installed properly.

WARNING

If ink gets in your eyes, wash them out with water at once and call a doctor if you are concerned.

168