Press a or b to choose Monochrome. Press OK.
c Press d or c to choose your photo. Press OK.
d
e Press OK and a or b to increase or decrease the number of copies.
f
b Press a or b to choose Enhance Photos. Press OK.

PhotoCapture Center™: Printing photos from a memory card or USB Flash memory drive

Remove Red-Eye

The machine detects eyes in your photos and will attempt to remove red-eye from your photo.

Note

There are some cases when red-eye may not be removed.

•When the face is too small in the image.

•When the face is turned too far up, down, left or right.

a Make sure you have put a memory card

or USB Flash memory drive in the proper slot.

Press (Photo Capture).

Monochrome

You can convert your photo to black & white.

a Make sure you have put a memory card

or USB Flash memory drive in the proper slot.

Press (Photo Capture).

b Press a or b to choose

 

Enhance Photos.

 

Press OK.

Do one of the following.

c Press d or c to choose your photo.

Press OK.

Press OK and change the print

d Press a or b to choose

settings. (See page 117.)

If you do not want to change any

Remove Red-Eye.

Press OK.

settings, press Color Start to print.

When Remove Red-Eye is

 

successful, the photo with the effect

 

is shown. The adjusted part is shown

 

in a red frame.

 

When Remove Red-Eye is

 

unsuccessful,

12

Unable to Detect. is shown.

Press OK to go back to the previous

 

level.

 

Note

 

 

 

 

Press # to try Remove Red-Eyeonce

 

again.

 

 

 

e Press OK and a or b to increase or

 

decrease the number of copies.

 

f Do one of the following.

 

Press OK and change the print

 

settings. (See page 117.)

 

If you do not want to change any

 

settings, press Color Start to print.

 

113