If your printed pages have smudge problems when using Ledger paper, your paper may be short grain paper. Choose
LGR - Short Grain and set it to On to avoid this problem.
a
b Press a or b to choose General Setup. Press OK.
c Press a or b to choose LGR - Short Grain.
d Press d or c to choose On. Press OK.
e Press Stop/Exit.
Note
•If you are not sure about the type of paper you are using, consult the paper packaging or paper manufacturer for paper specifications.
•Printing will be slower when using the
LGR - Short Grain setting.
General setup
Volume Settings
Ring VolumeYou can choose a range of ring volume levels, from High to Off.
While the machine is idle, press d or c | 3 |
to adjust the volume level. The LCD shows the current setting, and each key press will change the volume to the next level. The machine will keep the new setting until you change it. You can also change the volume through the menu, by following the instructions below:
Setting the Ring Volume from the menua
b Press a or b to choose General Setup. Press OK.
c Press a or b to choose Volume. Press OK.
d Press a or b to choose Ring.
e Press d or c to choose Low, Med, High or Off.
Press OK.
f Press Stop/Exit.
29