g Close the output paper tray cover. Check that the paper is flat in the tray and below the maximum paper mark (1).
1
h Slowly push the paper tray completely into the machine.
Loading paper and documents
Note
When you shorten tray#1, take the paper |
| |
out of tray. Then shorten the tray by |
| |
pressing the universal guide release |
| |
button (1). | 2 | |
Adjust the paper length guide (2) to fit the | ||
| ||
paper size you are using and then put the |
| |
paper in the tray. |
|
1
Note
DO NOT push Tray #1 into the machine too quickly. Doing this may cause injury to your hand by trapping it between Tray #1 and Tray #2. Please push Tray #1 in slowly.
i While holding the paper tray in place, | 2 |
|
pull out the paper support (1) until it clicks, and then unfold the paper support flap (2).
2
1
11