When you choose Paging, your machine dials the pager number you have programmed, and then dials your PIN (Personal Identification Number). This activates your pager so you will know that you have a fax message in the memory.
If you have set Paging, a backup copy of the received fax will automatically be printed at the machine.
a
b Press a or b to choose Fax. Press OK.
c Press a or b to choose Setup Receive. Press OK.
d Press a or b to choose Memory Receive. Press OK.
e Press a or b to choose Paging. Press OK.
f Enter your pager phone number followed by # # (up to 20 digits). Press OK.
Do not include the area code if it is the same as that of your machine.
For example, press:
1 8 0 0 5 5 5 1 2 3 4 # #.
Receiving a Fax
g Do one of the following:
If your pager needs a PIN, enter the PIN, press #, press Redial/Pause, and then enter your fax number followed by # #.
Press OK.
For example, press:
1 2 3 4 5 # Redial/Pause 1 8 0 0 5 5 5 6 7 8 9 # #
If you do not need a PIN, press:
Redial/Pause, and then enter your fax number followed by # #.
Press OK. |
|
For example, press: | 6 |
Redial/Pause 1 8 0 0 5 5 5 6 7 8 9 # # |
|
h Press Stop/Exit.
Note
•You cannot change a paging number or PIN remotely.
•Color faxes will be stored in the machine's memory only if you have chosen B&W(Max.LGR) as your Receiving Priority setting. (See Setting the Receiving Priority on page 54.)
57 