ATM Configuration
SmartSwitch chassis, use this field to enter the interface number for which you wish to configure a new circuit. (Remember, each pair of redundant interfaces shares a single IF index.)
3.In the VPI text box, enter the Virtual Path Identifier you wish to assign to this connection. Allowable values are 0 to 3; remember, the VPI you assign will be used to group virtual connections, allowing for channel trunking between ATM switches.
4.In the VCI text box, enter the Virtual Channel Identifier you wish to assign to this connection. Allowable values are 0 to 1023 for each VPI. For example, you could assign the same channel identifier — say, 25 — as many as four times: once with a VPI of 0, once with a VPI of 1, and so on. Again, remember that it is the combination of VPI and VCI that will be used to direct cells through the intermediate switches between the source and destination.
5.Click 
to add the new permanent circuit to the ATM interface. This circuit will remain in place until it is manually removed using the 
option in the Current Connections window.
Configuring Connections |
