Using the 7C0x SmartSwitch Hub View
Viewing the Interface List
You can use the Interface List application to view a complete list of MAC Addresses assigned to the interfaces installed in your 7C0x SmartSwitch chassis.
To open the Interface List:
1.If necessary, put the Hub View into the Interface Application Display mode (click either mouse button on the Module Index or Module Type box to display the Module menu, drag down to Application Display, then across to select Interface).
2.Click either mouse button on the Display Mode box in the Hub View to launch the Interface menu; drag down to Interface List, and release. The Interface List window, Figure
Figure 2-12. Interface List Window
The Interface List window displays an IF # for each interface and the MAC Address (physical address) associated with each interface. The first two interfaces are the 7X00 controller module’s interfaces to the 7C0x chassis switching backplane; note that they share a MAC address. The remaining index numbers are assigned in an XXXXYY format, where X = slot index times 10,000, and Y = port index. For example, an interface index of 30017 would be assigned to port 17 on the module installed in slot 3 of the chassis.
Monitoring Hub Performance |
