Using the 7C0x SmartSwitch Hub View
7C0x SmartSwitch firmware version
SPMA for the 7C0x SmartSwitch revision number
Firmware boot prom version
Figure 2-11. Device Configuration Window
The Device Configuration window provides the following hardware and software revision information:
Firmware Version
Displays version information for the firmware currently installed on your 7X00 controller module. To view a truncated description, click to place your cursor in the text field, then use the arrow keys to shift the display.
NOTE |
Although the text field allows you to edit and/or delete the displayed firmware description, you cannot set any changes you make. The information appears in a text field only so that it will be scrollable, allowing you to view the complete description.
Software Version
Displays the version of the SPMA Hub View application for the 7C0x SmartSwitch.
Boot Version
Displays the revision level of the 7X00 controller module’s boot prom.
Top Level Serial Number
Displays the serial number assigned to the 7X00 controller module. This serial number contains information about the date and location of manufacture, and the hardware revision level.
Base MAC Address
Displays the MAC address of the 7X00 controller module’s Host interface — the interface that connects to the 7C0x hub’s switching backplane.
Monitoring Hub Performance |
