Using the 7C0x SmartSwitch Bridge View
You can change values for the following polling interval fields:
Device Info
Specifies the time, in seconds, that SPMA waits before updating the Front Panel information (Uptime, Location, and so forth) in the Bridge Traffic View.
Bridge Port Display Info
Specifies the time, in seconds, that SPMA waits before updating statistical and status information in the Bridge Traffic View port display boxes.
Enabling and Disabling Ports
When you disable a bridge port, you disconnect that port’s network from the bridge entirely. Nodes connected to the network can still communicate with each other, but they can’t communicate with the bridge and other networks connected to the bridge.
In Transparent bridges, the disabled port does not forward any packets, nor does it participate in Spanning Tree operations. When you enable a port on a Transparent bridge, the port moves from the Disabled state through the Blocking, Learning, and Listening states to the Forwarding state.
NOTE |
Enabling and disabling a port changes its Port Status, not its Port State. An enabled port is able to participate in bridging and Spanning Tree operations. A disabled port on a Transparent bridge does not participate in bridging or Spanning Tree operations.
Enabling and Disabling a Transparent Bridge Port
To enable or disable a Transparent bridge port:
1.In the Bridge Traffic View, display the Port menu by clicking mouse button 3 in a Bridge Port box. Select the port that connects to the network that you want to enable or disable.
2.In the Port menu, click button 3 on Enable or Disable, drag right to Transparent, and release.
Enabling and Disabling Ports |
