n
n
Resume
3.While holding the operation panel, remove the document.
❑ Pull it in either direction, but do not force it.
❑If a multipage document is loaded, remove the entire document from the ADF.
If the paper does not pull out easily, do not force it. Call the Canon Customer Care Center (see page
4.When you are finished, close the operation panel by pressing it down from the center.
Be sure to close the operation panel until it locks into place. Otherwise the unit will not function properly.
5.Press Resume to clear the error message, then start the operation again. Be sure to fan and stack your document and replace the stack in the ADF.
Troubleshooting | Chapter 7 |