
Message | Error Code | Cause |
|
|
|
DIALING | — | The unit is dialing the |
|
| receiving fax machine. |
DOC. TOO LONG | #003 | It took more than 32 |
|
| minutes to send or |
|
| copy a document. |
|
| It took more than 32 |
|
| minutes to receive a |
|
| document. |
Action
Press the Stop button if you want to cancel the transmission.
Divide the document and send or copy each part separately.
Contact the other party. Have them divide the document and send each part separately.
The document is longer than 39.4 inches (1 meter).
Use a copy machine to make a reduced copy of the document and send the copy.
DOCUMENT READY | — | The document in the |
|
| ADF is ready for faxing, |
|
| scanning, or copying. |
ECM RX | — | The unit is receiving a |
|
| fax using Error |
|
| Correction Mode |
|
| (ECM). |
Send the document, scan the document, or make the copy.
ECM receptions may take longer than normal transmissions. Turn off ECM if you need to receive quickly, or if you know your local lines are in good condition. (See the MultiPASS Desktop Manager Software Guide or the Standalone Fax Manual.)
ECM TX | — | The unit is sending a |
|
| fax using Error |
|
| Correction Mode |
|
| (ECM). |
ECM transmissions may take longer than normal transmissions. Turn off ECM if you need to transmit quickly, or if you know your local lines are in good condition. (See the MultiPASS Desktop Manager Software Guide or the Standalone Fax Manual.)
Troubleshooting | Chapter 7 |