4.Dial the other party’s telephone/fax number.

Ex:

TEL= 7654321

Use one of the dialing methods described earlier in this chapter.

If you make a mistake during dialing, press Hook or put down the handset and start again from step 3.

5. When you hear the other party answer the call, pick up the handset and you can talk.

If you pressed Hook in step 3 instead of lifting the handset, you will hear the other party’s voice but they will not be able to hear you through the speaker. Pick up the handset to talk to the other party.

If you hear a high-pitched signal, instead of the other party’s voice, press Start/Scan. If you picked up the handset to dial, hang up the handset. The unit will begin sending the document.

6.When you are ready to send the document, ask the other party to press the start button on their fax unit.

Start / Scan

7. When you hear the high-pitched signal of the other party’s fax unit press

 

Start/Scan on your unit and then hang up the handset.

The unit begins sending the document.

You will see a series of brief messages showing details on the transmission.

nBe sure to hang up the handset after you press the Start/Scan button on your unit. If you hang up first, you will disconnect the call.

If the offhook alarm starts beeping, make sure the handset is resting properly in its cradle.

If you send a color document to a fax machine that does not support color faxing, the document will not be sent, and the LCD display will show this message: TRY AGAIN IN B/W. Try sending again in black & white.

Sending Faxes

Chapter 4

Sending Faxes

4-9

Page 88
Image 88
Canon MP-C545 user manual Dial the other party’s telephone/fax number