Receiving Using the Distinctive Ring Pattern Detection Feature: DRPD

Some telephone companies offer a Distinctive Ring Pattern (DRP) service whereby they assign two or more telephone numbers with distinctive ring patterns to a single telephone line. If your phone company offers such a service, you can have both a fax number(s) and a telephone number(s) for your MultiPASS using only one telephone line.

Your MultiPASS will automatically monitor incoming calls and based on the distinctive ring pattern, it will determine if the call is from a fax machine trying to send a document or from a telephone trying to make a voice call.

Use the information in this section to set up the MultiPASS for use with a DRP service. For more details on the DRP service, contact your local telephone company. (Your telephone company may have a different name for this service. Also, this service may not be offered in all areas.)

Types of Ring Patterns

Your telephone company will assign a distinctive ring pattern to each number when you order the DRP service. The setting you make in the MultiPASS must match the setting assigned by the telephone company.

You can set the MultiPASS for the following ring patterns:

NORMAL RING

Ring type of normal telephone line (recommended for voice calls)

DOUBLE RING

Two short rings at regular intervals (recommended for fax calls)

SHORT-SHORT-LONG (Triple ring) Short-short-long at regular intervals

SHORT-LONG-SHORT (Triple ring) Short-long-short at regular intervals

OTHER RING TYPE

Patterns other than those described above

FAX/TEL AUTO SW

5-6

Receiving Faxes

Chapter 5

Page 113
Image 113
Canon MP-C545 user manual Types of Ring Patterns, Double Ring