Christie Digital Systems CX50, CX67, CX60 25. Assigning Projector ID, 26. Tiling Setup

Section 3: Operation

PROJECTOR ID

Use this option to set a specific 2-digit ID number for the projector. In a network environment, having the ability to control one or all projectors is very important. Assigning ID numbers to each projector in a network allows you to do this.

To assign an ID number using the option in the Communications menu, select the option Projector ID. Press Enter twice until you see two dashed lines, “- -”. Using the numbered keys on the keypad, enter a unique 2-digit ID number for the current projector. Press Enter to accept and save the entry and/or Exit to exit the menu or cancel. See Figure 3.25. Press Status to check that the ID number for your projector was successfully changed. Continue this process for each projector if you’re working in a network.

Figure 3.25. Assigning Projector ID

For additional information on switching communication control from a single projector to multiple projectors (called “broadcast control”), see 3.7 Using Multiple Projectors.

Tiling Setup

Use the options in the Tiling Setup menu when working with multiple projectors in a display wall. The options provided allow you to define the size of the array and identify the location of the current projector. NOTE: If you are using a stand- alone unit, the values for each of the first four options should be set to 1.

Figure 3.26. Tiling Setup

NUMBER OF ROWS & NUMBER OF COL

Enter the total number of rows and columns in the display wall by adjusting the slidebar for each of these menu items. See Figure 3.26.

PROJECTOR ROW & PROJECTOR COL

Enter the specific row and column number for the current projector.

Although you can identify projectors in any pattern in a wall, it is common to

3-20 RPMX/CX50/CX60/CX67 User’s Manual