Christie Digital Systems CX50, CX67, CX60 user manual Source Setup, Connections

Section 2

Source Setup

Introduction This section provides details on how to connect various external sources to the projector. All connections are made to the main input panel of the Electronics Module (EM).

2.1 Source	It is recommended that you connect your sources before powering up the
	projector.
Connections
RGBHV (5 BNCs) ' The top input interface provides 5 BNC connectors for connecting to a variety of
	sources such as VGA, SVGA, XGA, SXGA, Mac, PowerMac, DEC, Sun, SGI
	and others. This projector supports multiple sync types with RGB signals: sync-
	on-green, composite sync, and separate H & V syncs.
	To properly connect RGB sources use the table and illustration below (Figure
	2.1.).

			5 BNC Connectors
RGB Source Outputs	Red	Green		Blue	Hor/Comp	Vert
sync-on-green	√	√		√
composite sync	√	√		√	√
separate horizontal and	√	√		√	√	√
vertical sync

NOTE: Connect the Sync BNC inputs first.

Figure 2.1. Connecting RGBHV sources

RPMX/CX50/CX60/CX67 User’s Manual 2-1