MATERIAL USAGE INFORMATION
Pressing the VIEW key followed by the * key will cause all material usage totals to be printed. The (*54) flag need not be on. These totals are since the last time printed, and since the last time cleared.
This same information may be periodically, and automatically, printed by setting the PRT parameter to a time interval number. (See
PARAMETER, PRT)
The printout looks like this:
DATE | TIME | TOTALS: | GRAND | PCT CURRENT | PCT | |
CURRENT 11/01/90 | 18:26:45 | CYCLES | 83 |
| 1 |
|
LAST PRINTED 11/01/90 | 18:19:59 | REGRIND | 6.2 | .4 | 0.0 | 0 |
LAST CLEARED 10/30/90 | 20:02:36 | NATURAL | 1485.4 |
| 19.0 |
|
|
| COLOR | 15.3 | 1.01 | 0.2 | 1.0 |
WEIGH SCALE ID# 120 |
| ADDITIVE | 0.0 | .00 | 0.0 | .00 |
TOTALS ARE IN POUNDS |
| TOTAL | 1506 |
| 19 |
|
POUNDS PER HOUR 286.2 |
|
|
|
|
|
|
The Totals may be in POUNDS or KILOS depending on your selection of weight unit using the *89 function in the PROGRAM mode.
The POUNDS PER HOUR is based on the total material throughput since the last time totals were printed. Cycle time variations will cause this number to not be exact. The longer the time period, the more correct the rate.
GRAND totals are totals since the last time the data was cleared using the *00 routine, or by pressing 00 immediately after executing this print routine.
CURRENT totals are totals since the last time a printout was obtained.
Page 78
