196 Configuring System Information
www.dell.com | support.dell.com
Modifying the RADIUS Server settings
1
Open the
RADIUS Settings
page.
2
Click
Show All
to display the
RADIUS Servers List
.
3
Modify the fields in the dialog.
4
Click
Apply Changes
.
The RADIUS Server settings are modified, and the device is updated.
Deleting a RADIUS Server for the RADIUS Servers List
1
Open the
RADIUS Settings
page.
2
Click
Show All
to display the
RADIUS Servers List
.
3
Select a RADIUS Server and check the
Remove
check box.
The RADIUS server is removed from the list
.
Defining RADIUS Servers Using CLI Commands
The following table summarizes the equivalent CLI commands for defining fields displayed on the
RADIUS Settings
page.
Table 6-38. RADIUS Server CLI Commands
CLI Command Description
radius-server timeout
timeout
Sets the interval for which a router waits for a
server host to reply.
radius-server
retransmit
retries
Specifies the number of times the software
searches the list of RADIUS server hosts.
radius-server deadtime
deadtime
Configures unavailable servers to be skipped.
radius-server key
key-
string
Sets the authentication and encryption key for
all RADIUS communications between the
router and the RADIUS environment.
radius-server host
ip-
address
[auth-port
auth-port-number
]
[timeout timeout]
[retransmit
retries
]
[deadtime
deadtime
]
[key
key-string
]
[source
source
]
[priority
priority
]
Specifies a RADIUS server host.
show radius-servers Displays the RADIUS server settings.