Configuring Switch Information 323
console(config)#interface range ethernet g1-9
console(config-if)# switchport mode general
console(config-if)# switchport general allow vlan add 8
console(config)#interface vlan 8
Console(config-if)# bridge multicast address 0100.5e02.0203
add ethernet g1-9
Console(config-if)# exit
Console(config)# exit
Console# show bridge multicast address-table
Vlan MAC Address type Ports
---- -------------- ----- -----------
1 0100.5e02.0203 static g1, g2
19 0100.5e02.0208 static g1-8
19 0100.5e02.0208 dynamicg 9-11
Forbidden ports for multicast addresses:
Vlan MAC Address Ports
-------------------------------------
1 0100.5e02.0203 g8
19 0100.5e02.0208 g8
Console# configuration
Console (config)# interface vlan 8
Console (config-if)# bridge multicast address 0100.5e02.0203
Console (config-if)# bridge multicast forbidden address
0100.5e02.0203 add ethernet g9
Assigning Multicast Forward All Parameters
Use the
Bridge Multicast Forward All
page to enable attaching ports or LAGs to a switch that is
attached to a neighboring Multicast router/switch. Once IGMP Snooping is enabled, multicast
packets are forwarded to the appropriate port or VLAN.
To open the
Bridge Multicast Forward All
page, click
Switch
→
Multicast Support
→
Bridge
Multicast
→
Bridge Multicast Forward All
in the tree view.