38 Hardware Description
www.dell.com | support.dell.com
PowerConnect 6024F
The PowerConnect 6024F ports differ from the PowerConnect 6024 only in port designation:
Ports 1-16 are designated as SFP ports, and ports 17-24 are designated as combo ports. The port
numbers are shown in the figure below.
For information about how the ports function, see the port description for the PowerConnect 6024.
Figure 2-2. PowerConnect 6024F with 24 SFP Ports
Out-of-Band Management Port
The Out-of-Band (OOB) management port is a 10/100 Mbps Ethernet port that you can use to
connect directly to the switch to perform system administrator management applications. The
Out-of-Band port is regarded as a regular IP interface to the system, and all management interfaces
are available over this port.
For more information about configuring Out-of-Band, see "Out-of-Band Management Port."
Console (RS-232) Port
The console (RS-232) port is used only for management via a serial interface. This port is a direct
connection to the switch, used to access CLI from a console terminal connected to an EIA/TIA-232
port.
The console port supports synchronous data of eight data bits, one stop bit, and no parity bit. The
default baud rate is 115,200 bps.
159 311 13 15 17 19 21 23 17 19 21 23
2 4 6 8 10 12 14 16 18 20 22 24 18 20 22 24
SFP Ports
Reset Button
Console
(RS-232)
System LEDs
SFP Ports
Out of Band
Base-T Ports
Base-T Ports
7