126 Configuring System Information
www.dell.com | support.dell.com
Figure 6-17. OOB IP Interface Parameters
The
OOB IP Interface Parameters
page contains the following parameters:
IP Address
—The Out-of-Band interface IP address.
Prefix Length
—The number of bits that comprise the source IP address prefix, or the network
mask of the source IP address.
Ty p e
—The means by which the Out-of-Band IP interface was created; DHCP or static.
Remove
—When checked, removes the interface from the
IP Address
drop-down list.
NOTE: You can configure DHCP IP addresses for Out-of-Band management on the DHCP IP Interface
page (System→ IP Address→ DHCP IP Interface).
Adding an IP Interface
1
Open the
OOB IP Interface Parameters
page.
2
Click
Add
to display the
Add a Static OOB IP Interface
page.
3
The
Network Mask
field specifies the subnetwork mask of the source IP address.
4
Complete the fields in the page.
5
Click
Apply Changes
.
The new interface is added, and the device is updated.