384 Configuring Routing
www.dell.com | support.dell.com
DVMRP Neighbor Table
The
DVMRP Neighbor Table
page contains information about neighboring port interfaces.
DVMRP neighbors are discovered through DVMRP messages. To open the
DVMRP Neighbor
Table
page, click
Router
→
IP Multicast
→
DVMRP Neighbor Table
in the tree view.
Figure 8-27. DVMRP Neighbor Table
Interface
— Interface number on which DVMRP is enabled.
Neighbor
— IP address of the neighboring interface.
Up Time
— Amount of time since the neighboring interface became a neighbor.
Expiry Time
— Indicates the minimum amount of time before the interface is timed out.
Major Version
— The neighboring router’s major version number.
Minor Version
— The neighboring router’s minor version number.
State
— The neighboring device state.
Viewing the DVMRP Neighbor Table Using CLI Commands
The following table contains the CLI command for viewing the DVMRP Neighbor Table.
The following is an example of the CLI command:
Table 8-23. DVMRP Neighbor Table CLI Commands
CLI Command Description
show ip dvmrp neighbor
[ethernet
interface-number
|
vlan
vlan-id
| port-channel
number
]
Shows the DVMRP Neighbor table.