Dell 6024, 6024 F - page 113

Configuring System Information 123
Facility —A user-defined application from which system logs are sent to the remote server. Only
one facility can be assigned to a single server. If a second facility level is assigned, the first facility
level is overridden. All applications defined for a device use the same facility on a server. The
possible field values are local 0, local 1, local 2, local 3, local 4, local 5, local 6 and local 7.
Description (0-64 characters) —Displays the user-defined server description.
Severity to Include —The log severity. Selecting a severity level automatically selects all higher
severity levels.
Delete Server —When checked, deletes a server from the Available Servers list.
The
OOB Remote Log Server Settings page also contains a severity list. The severity definitions
are the same as the severity definitions on the RAM Log Table on page 138.
Sending Logs to an Out-of-Band Log Server
1 Open the OOB Remote Log Server Settings page.
2 Define the UDP Port , Facility , and Description fields.
3 Select the log type and log severity.
4 Click Apply Changes .
The log settings are saved, and the device is updated.
NOTE: Before adding a new server, determine the IP address of the Out-of-Band remote log server.
Defining a New Out-of-Band Log Server
1 Open the OOB Remote Log Server Settings page.
2 Click Add to display the Add an OOB Log Server page.
3 Complete the fields in the dialog.
4 Click Apply Changes .
The server is defined and added to the
Available Servers List.
Deleting an Out-of-Band Log Server
1 Open the OOB Remote Log Server Settings page.
2 Click Show All to display the OOB Remote Log Servers Table page.
3 Select a server and check the Remove checkbox.
4 Click Apply Changes .
The server is deleted, and the device is updated.
Configuring Out-of-Band Remote Server Logs Using the CLI Commands
The following table summarizes the CLI commands for working with fields in the OOB Remote
Log Server Settings
page.