454 Configuring Quality of Service
www.dell.com | support.dell.com
5
Select either
And
or
Or
from the
Match
drop-down menu if both the
IP ACL
and
MAC ACL
check boxes are selected.
6
Click
Apply Changes
.
The class map is created, and the device is updated.
Editing a Class Map
1
Open the
QoS Class Map
page.
2
Select a class map from the
Class-Map Name
drop-down menu.
3
Edit the remaining fields on the page as desired.
4
Click
Apply Changes
.
5
The class map is edited, and the device is updated.
Deleting a Class Map
1
Open the
QoS Class Map
page.
2
Select a class map from the
Class-Map Name
drop-down menu.
3
Check the
Remove
check box.
4
Click
Apply Changes
.
The class map is deleted, and the device is updated.
Displaying the Class Map Table
1
Open the
QoS Class Map
page.
2
Click
Show All
to display the
Class Map Table
page.
Defining QoS Class Maps Using the CLI Commands
The following is an example of the CLI commands:
console(config)# class-map class1 match-all
Table 10-13. QoS Class Maps CLI Commands
CLI Command Description
class-map
class-map-
name
[match-all |
match-any]
Creates a class map and enters class map
configuration mode.
match access-group
acl-
name
Defines the match criterion to classify traffic;
active only under class map configuration
mode.
show class-map [
class-
map-name
]
Displays all the class maps.