Dell 6024, 6024 F Defining SNTP Servers

116 Configuring System Information
www.dell.com | support.dell.com
Defining SNTP Authentication Settings Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the
SNTP Authentication
page.
The following is an example of the CLI commands:
Defining SNTP Servers
The SNTP Servers page contains information for enabling SNTP servers, as well as adding new
SNTP servers.
To open the
SNTP Servers page, click System → SNTP → Servers in the tree view.
Table 6-6. SNTP Authentication CLI Commands
CLI Command Description
sntp authenticate
Set to require authentication for received Network
Time Protocol (NTP) traffic from servers.
sntp authentication-
key
number md5 value Defines an authentication key for SNTP.
sntp trusted-key
key-number
Defines the authentication key used to
authenticate the SNTP server.
show sntp
configuration Displays the SNTP configuration.
Console(config)# sntp authentication-key 8 md5 ClkKey
Console(config)# sntp trusted-key 8
Console(config)# sntp authenticate