Configuring Routing 347
Click
Router
→
RIP
→
Global Parameters
in the tree view to display the
RIP Global Parameters
page.
Figure 8-8. RIP Global Parameters Page
RIP Status
—
Enables or disables RIP on the device.
Redistribute OSPF Routes
— When enabled, redistributes routes from OSPF to RIP.
Redistribution of routes involves importing foreign routing interfaces to RIP.
Redistribute Static Routes
—
When enabled, redistributes routes from static routes to RIP.
Enabling RIP, Redistribution of OSPF Routes, Redistribution of Static Routes
1
Open the
RIP Global Parameters
page.
2
Select
Enabled
in the RIP global parameter field that you want to enable.
3
Click
Apply Changes
.
RIP is enabled on the device.
Configuring RIP Global Parameters Using CLI Commands
The following table contains the CLI commands for configuring the RIP global parameters.
Table 8-6. RIP Global Parameter CLI Commands
CLI Command Description
router rip enable Enables the Routing Information Protocol
(RIP) on the device.
no router rip enable Disables the Routing Information Protocol
(RIP) on the device.