380 Configuring Routing
www.dell.com | support.dell.com
The following is an example of the CLI command:
Console (config-if)# interface ethernet g5
Console (config-if)# ip dvmrp
Console (config-if)# ip dvmrp metric 15
Console (config-if)# exit
Console (config)# exit
Console> show ip dvmrp interface
Multicast routing enabled.
Multicast routing protocol is DVMRP.
Interface IP address Metric RCV Bad RCV Bad Sent PacketsRoutesRoutes
----------------------------------------------
eth g1 172.16.1.1 10012
DVMRP Prune Table
The
DVMRP Prune Table
page lists the routers upstream prune state. To open the
DVMRP Prune
Table
page, click
Router
→
IP Multicast
→
DVMRP Prune Table
in the tree view.
Figure 8-24. DVMRP Prune Table
Group IP Address
— IP address of the prune group.
Source IP Address
— Source IP address to be pruned.
Source Mask
— Source IP mask that has been pruned.
Expiry Time
— The remaining time before the upstream flow is pruned.