Configuring Switch Information 315
The following is an example of the CLI commands:
Console (config)# lacp system-priority 120
Console (config)# interface ethernet g8
Console (config-if)# lacp port-priority 247
Console (config-if)# lacp timeout long
Console (config-if)# exit
Console# show lacp ethernet g1 statistics
Port 1 LACP Statistics:
LACP PDUs sent:2
LACP PDUs received:2
Defining LAG Membership
Your switch supports seven LAG per system, and seven ports per LAG. Use the
LAG Membership
page to assign ports to LAGs. To open the
LAG Membership
page, click
Switch
→
Link
Aggregation
→
LAG Membership
in the tree view.
lacp port-priority
value
Configures the priority value for physical
ports.
lacp timeout {long |
short} Assigns an administrative LACP timeout.
show lacp ethernet
interface
[parameters |
statistics | protocol-
state]
Displays LACP information for ethernet
ports.
Table 7-29. LACP Parameters CLI Commands
CLI Command Description