Dell 6024, 6024 F Configuring DVMRP Interfaces

Configuring Routing 377
The following is an example of CLI commands:
Console> show ip igmp groups
Group Address Interface Uptime Expires Last Reporter
------------------------------------------------------
239.255.255.254 eth g11w0d00:02:19 172.21.200.159
224.0.1.40 eth g31w0d00:02:15 172.21.200.1
224.0.1.40 eth g31w0d00:02:1 static
224.0.1.1 eth g11w0d00:02:11 172.21.200.11
224.9.9.2 eth g11w0d00:02:17 172.21.200.155
232.1.1.1 eth g15d21h00:02:11 172.21.200.206
Configuring DVMRP Interfaces
Distance Vector Multicast Routing Protocol (DVMRP) uses the Reverse Path Forwarding (RPF)
Multicast algorithm to create source based multicast delivery trees. DVMRP is an RPF checking
protocol based on DVMRP Routing information. The routing information is collected during
routing the exchange.
The
DVMRP Interface page contains information about DVMRP interface configurations.
To open the
DVMRP Interface page, click Router → IP Multicast → DVMRP Interface in the tree
view.