68 Configuring the Switch
www.dell.com | support.dell.com
Please enter the Management System IP address(A.B.C.D) or
wildcard (0.0.0.0) to manage from any Management Station:
3
Enter the following:
– User SNMP community string, for example "MYSETUPWIZARD"
– Management System IP address for example "0.0.0.0".
4
Press
Enter
.
Wizard Step 2
The following is displayed:
Now we need to setup your initial privilege (Level 15) user
account. This account is used to login to the CLI and Web
interface. You may setup other accounts and change privilege
levels later. For more information on setting up user accounts
and changing privilege levels, see the user documentation.
To setup a user account:
Please enter the user name:
Please enter the user password:
Please reenter the user password:
5
Enter the following:
– User name, for example "admin"
– Password and password confirmation.
NOTE: If the first and second password entries are not identical, the user is prompted until they are
identical.
6
Press
Enter
.
Wizard Step 3
7
The following is displayed:
Next, an IP address is setup. The IP address is defined on the
OOB port. This is the IP address you use to access the CLI, Web
interface, or SNMP interface for the switch.
To setup an IP address:
Please enter the device IP address(A.B.C.D):
Please enter the IP subnet mask (A.B.C.D or /nn):
8
Enter the IP address and IP subnet mask, for example 192.168.1.100 as the IP address and
255.255.255.0 as the IP subnet mask.