Dell 6024, 6024 F Viewing the IGMP Dynamic Group Table

Configuring Routing 375
The page contains the following fields:
•
Interface — The IP Multicast Group address of which the port is a member.
•
IP Multicast Group — The IP multicast group to which this interface is a member.
•
Group Up Time — Indicates in ticks the amount of time that has passed since the entry was
created. The time format is hour/minute/second.
•
Last Reporter — The last member to join the IP Multicast group. If no member has entered
the IP Multicast group, the value is 0.0.0.0.
•
Remove — When checked, removes an IGMP interface.
Configuring Static Interface Grouping Using CLI Commands
The following table contains the CLI commands for static interface grouping.
The following is an example of the CLI commands:
Console (config)# interface ethernet g5
Console (config-if)# ip igmp static-group 192.168.4.1
Viewing the IGMP Dynamic Group Table
The IGMP Dynamic Group Table displays IGMP information regarding each IP Multicast group
whose members were dynamically assigned to an interface on a physical port.
To open the
IGMP Dynamic Group Table , click Router → IP Multicast → IGMP Dynamic Group
Table
in the tree view.
Table 8-17. Static Interface Grouping CLI Commands
CLI Command Description
ip igmp static-
group
group-
address
Configures the router to be a statically connected member
of the specified group on the interface.