222 Configuring System Information
www.dell.com | support.dell.com
The following is an example of CLI commands:
Console (config)# snmp-server host 12.1.1.1 Dell-community
Console (config)# end
Console# show snmp
Community-String Community-Access View name IP address Type
---------------- ---------------- ----- ---------- ----
Community-String Group name IP address Type
---------------- ---------- ---------- ----
OOB management stations
Community-String Community-Access View name IP address Type
---------------- ---------------- --------- ---------- ----
Community-String Group name IP address Type
---------------- ---------- ---------- ----
Traps are enabled.
Authentication-failure trap is enabled.
Version 1,2 notifications
Target
Address Type Community Version Udp
Port Filter
name To
Sec Retries
-------- ---- --------- ------- ----- ------- --- -------
12.1.1.1 Trap Dell_comm
unity 2 162 1500 3
OOB Notification Receivers
Target
Address Type Community Version Udp
Port Filter
name To
Sec Retries
-------- ---- --------- ---- ---- ------- --- -------