Configuring Quality of Service 445
Removing UDP to Queue Mapping
1
Open the
UDP to Queue
page.
2
Click
Show All
to display the
UDP to Queue Mapping Table
page.
3
Click
Remove
for each of the UDP ports for which queue mapping should be removed.
4
Click
Apply Changes
.
Defining UDP to Queue Mapping Using the CLI Commands
The following is an example of the CLI commands:
console(config)# qos map udp-port-queue 68 to 1
console(config)# exit
console# show qos map udp-port-queue
Udp port-queue map:
Port queue
----- -----
8000 1
8001 2

Configuring Basic QoS Mode

The
Basic QoS Mode
page contains links to QoS pages on which Trust Mode and DSCP Rewriting
are configured. To open the
Basic QoS Mode
page, click
Quality of Service
→
Basic QoS Mode
in
the tree view.
Table 10-8. UDP to Queue Mapping CLI Commands
CLI Command Description
qos map udp-port-queue
port1 ... port 8 to queue-
id
Modifies the UDP-Port to
queue.
show qos map [dscp-queue |
tcp-port-queue | udp-port-
queue | dscp-policed |
dscp-mutation]
Displays all the QoS maps.