Configuring Switch Information 271
Adding a Static MAC Address
1
Open the
Static MAC Address
page
.
2
Click
Add
to display the
Add Static MAC Address
page.
3
Complete the fields.
4
Click
Apply Changes
.
The new static address is added to the
Static MAC Address Table
, and the device is updated.
Modifying a Static Address in the Static MAC Address Table
1
Open the
Static MAC Address
page
.
2
Modify the fields.
3
Click
Apply Changes
.
The static MAC address is modified, and the device is updated.
Removing a Static Address from the Static Address Table
1
Open the
Static MAC Address
page
.
2
Click
Show All
to display the
Static MAC Address Table
.
3
Select a table entry.
4
Check the
Remove
check box.
5
Click
Apply Changes
.
The static address is deleted, and the device is updated.
Configuring Static Address Parameters Using CLI Commands
The following table summarizes the equivalent CLI commands for configuring static address
parameters as displayed in the
Static MAC Address Page
.
Table 7-12. Static Address CLI Commands
CLI Command Description
bridge address mac-address
{ethernet
interface
| port-
channel
port-channel-
number
} [permanent |
delete-on-reset | delete-
on-timeout | secure]
Adds a static MAC-layer station source
address to the bridge table.