306 Configuring Switch Information
www.dell.com | support.dell.com
Adding a Protocol Group
1
Open the
Protocol Group
page.
2
Click
Add
to display the
Assign Protocol to Group
page.
3
Complete the fields on the page and click
Apply Changes
.
The protocol group is assigned, and the device is updated.
Assigning VLAN Protocol Group Settings
1
Open the
Protocol Group
page.
2
Complete the fields on the page and click
Apply Changes
.
The VLAN protocol group parameters are defined, and the device is updated.
Removing Protocols From the Protocol Group Table
1
Open the
Protocol Group
page.
2
Click
Show All
to display the
Protocol Group Table
.
3
Check
Remove
for the protocol groups that you want to remove.
4
Click
Apply Changes
.
The protocol is removed, and the device is updated.
Defining VLAN Protocol Groups Using CLI Commands
The following table contains the CLI commands for configuring Protocol Groups.
The following example maps ip-arp protocol to group "213":
Console (config)# vlan database
Console (config-vlan)# map protocol ip-arp protocols-group 213

Adding Protocol Ports

The
Protocol Port
page adds interfaces to protocol groups.
To open the
Protocol Port
page, click
Switch
→
VLAN
→
Protocol Port
in the tree view.
Table 7-26. VLAN Protocol Groups CLI Commands
CLI Command Description
map protocol
protocol
[
encapsulation
] protocols-
group
group
Adds a special protocol to a named group
of protocols, which may be used for
protocol-based VLAN assignment.