Dell 6024, 6024 F Defining IP Interfaces

144 Configuring System Information
www.dell.com | support.dell.com
Defining IP Interfaces
The IP Interface Parameters page contains parameters for assigning IP addresses to interfaces.
To open the
IP Interface Parameters page, click System → IP Addressing → Interface Parameters in
the tree view.
Figure 6-24. IP Interface Parameters
The IP Interface Parameters page contains the following fields:
IP Address — The interface IP address.
Prefix Length — The number of bits that comprise the source IP address prefix, or the network
mask of the source IP address.
Interface — The interface type for which the IP address is defined. The possible field values are
Port , LAG , or VLAN .
For information about configuring Link Aggregated Groups
(LAGs), see "Aggregating Ports." For
information about configuring VLANs, see "Configuring VLANs."
Ty p e — Indicates whether or not the IP address was configured statically.
Forward Directed IP Broadcasts — Enables the translation of a directed broadcast to physical
broadcasts. Disabling drops IP-directed broadcasts and does not forward them.
Broadcast Type — Defines an interface broadcast address.
One Fill indicates the interface broadcast address is one fill (255.255.255.255).
Zero Fill indicates the interface broadcast address is zero fill (0.0.0.0).