DeLonghi A 1346 G manual ANTI-TILT Bracket

ANTI-TILT BRACKET

■WARNING: In order to prevent accidental tièpping of the appliance, for example by a child climbing onto the open oven door, the stabilizing means must be installed. Please refer to instructions for installation.

1.The anti-tilt bracket has to be attached as shown on figure below, it has to be fixed on the floor and on the rear wall by no. 4 (four) suitable screws (not supplied).

2.After fixing the anti-tilt bracket, slide cooker into place. Be sure the rear right foot slides under the anti-tilt bracket attached.

Figure 1.9

Dotted line showing the position of the cooker when installed

ANTI-TILT BRACKET

FIXING

= =

570.5 mm

Anti-tilt Foot of bracket cooker

11