DeLonghi A 1346 G manual Burners, Triple Ring Burner

Models: A 1346 G

1 60
Download 60 pages 22.85 Kb
Page 53
Image 53
BURNERS

BURNERS

Figure 8.1

They can be removed and washed only with soapy water. Detergents can be used but must not be abrasive or corrosive.

Do not use abrasive sponges or pads.

Do not put in dishwasher.

After each cleaning, make sure that the burner-caps, as well as the burners, have been well wiped off and CORRECTLY POSITIONED.

It is essential to check that the burner flame distributor F and the cap C has been correctly positioned (fig. 8.1) - failure to do so can cause serious problems.

Check that the electrode S (fig. 8.1) is always clean to ensure trouble-free sparking.

Check that the probe T (fig. 8.1) next to each burner is always clean to ensure correct operation of the safety valves. Both the probe and ignition plug must be very carefully cleaned.

C

F

S

TRIPLE RING BURNER T

Note:

The electrode S must be very carefully cleaned. To avoid damage to the electric ignition do not use it when the burners are not in place.

TRIPLE RING BURNER

The triple ring burner must be correctly positioned (see fig. 8.2); the burner rib must be located in position as shown by the arrow.

The burner correctly positioned must not rotate (fig. 8.3).

Then position the cap A and the ring B (fig. 8.3).

Figure 8.2

Figure 8.3

A B

53

Page 53
Image 53
DeLonghi A 1346 G manual Burners, Triple Ring Burner