AUTOMATIC OVEN COOKING
To cook food automatically in the oven, it is necessary to: 1.Set the length of the cooking time
2.Set the end of the cooking time
3.Set the temperature and the oven cooking program.
These operations are performed as follows:
1.Set the length of the cooking time by pushing the 
button and the 
button to advance, or 
to go back if you have passed the
desired time (fig. 6.7).
The AUTO and the 
symbol will be on.
2.Set the end of the cooking time by pressing the 
button (the cooking time already
added to the clock time will appear), and the 
button (fig. 6.8); if you pass the
desired time you may get back by pushing the 
button.
After this setting, the 
symbol will go off. If after this setting, the AUTO flashes on the panel and a buzzer sounds, it means there was an error in the programming. In this case, modify the end of cooking time or the cooking time itself by following again the mentioned instructions above.
3.Set the temperature and the cooking program by using the switch and thermostat knobs of the oven (see specific chapters).
The oven is now set to turn on and off at the programmed times.
During cooking, the 
symbol remains on. By pushing the 
button you can see the time that remains until the end of cooking.
The cooking program may be cancelled in any time by pushing 
.
At the end of the cooking time the oven will turn off automatically, the 
symbol will turn off, AUTO will flash and a buzzer will sound, which can be turned off by push- ing any of the buttons.
Turn the temperature and thermostat knobs to zero and set the programmer to “manu- al” by pressing the 
button.
Attention: A power failure makes the clock go to zero and cancels the set programs. After a power failure, three zeros will flash on the panel.
48
