Other Operations and Convenient Functions

Getting

Symbols used to indicate buttons in this manual

Button located on both the main unit

and the remote control unit BUTTON

Button only on the main unit <BUTTON>

Button only on the remote control unit [BUTTON]

<SOURCE SELECT>

Other Operations

Playing a Blu-ray Disc Player Compatible with DENON LINK 4th

To play DENON LINK 4th signals, make HDMI and DENON LINK connections with the compatible Blu-ray disc player.

DENON LINK 4th uses the clock of the AV amplifier connected by DENON LINK to achieve HDMI signal transfer with little jitter when playing BD.

1Assign “HDMI” to the input source to be used, and assign “D.LINK” to the “Digital” setting (vpage 59 “Input Assign”).

2Set“ON”.“HDMI Control” – “Control” (vpage 44) to

3Either turn <SOURCE SELECT> or press [INPUT SOURCE SELECT] to select the input source assigned in step 1.

NOTE

•Set the Blu-ray disc player’s “HDMI Control” setting to “ON”, the “DENON LINK” setting to “4th”. For instructions on operation, refer to the Blu-ray disc player’s manual.

•The jitter-free function does not work except during BD playback. In this case, the video signal is output from the HDMI OUT terminal, and the audio signal from the DENON LINK terminal.

•When a BD is played with the input mode set to “Auto”, playback is performed in the DENON LINK 4th mode. When a disc other than a BD is played with the input mode set to “Auto”, playback is automatically performed in the DENON LINK 3rd mode.

•When the input mode is set to “HDMI”, normal HDMI playback is performed.

•When the input mode is set to “Digital”, playback is fixed to the DENON LINK 3rd mode and BDs cannot be played.

Control Remote zone-Multi Playback Settings Connections Started

[MAIN]

[INPUT SOURCE SELECT]

The “ ” indicator lights on the display.

4Set “Input Mode” (vpage 61) to “AUTO”.

5Select the surround mode (vpage 87 “Selecting the

Surround Mode (Surround Mode)”).

6 Start playing the BD. Playback starts.

Specifications Troubleshooting Information

97