Learning Function

If your AV devices are of a brand other than DENON or if they cannot be operated with the preset memory function, their remote control signals can be transfered to stored in the AVR-4810CI’s main remote control unit.

1 Press and hold in [RC SETUP] for at least 3 seconds. The signal transmission indicator flashes twice.

2 Press [9], [7] and [5], in that order.

The signal transmission indicator flashes twice and the learning mode is set.

3Press [DEVICE SELECTOR] for the device you wantto set

4 Press the button to be set.

The main remote control unit’s display turns off.

bIf a button that cannot be learned is pressed, the signal transmission indicator lights but the signal is not learned.

5Point the main remote control units directly at each other and press and hold the button on the other

device’s remote control unit that you want to learn.

Once learning is completed normally, the display lights and the signal transmission indicator flashes twice.

b If you want to learn other buttons, repeat steps 4 and 5.

b The mode can be switched by pressing [DEVICE SELECTOR].

b The signal transmission indicator lights once for a long time if learning was not possible

6Press and hold in [RC SETUP] for at least 3 seconds.The signal transmission indicator flashes twice and the setting

is completed.

With some remote control units, the signals cannot be learned or the device will not operate properly even when the signals have been learned. In this case, use the device’s own remote control unit.

Learned buttons have priority over the preset memory. If you no longer need the learned setting, reset the learning function (vpage 116).

NOTE

[POWER ON], [POWER OFF] and [SOURCE SELECT] cannot be learned.

Do not learn any remote control signals at [RC SETUP].

The MAIN, ZONE2, ZONE3, ZONE4 and MACRO modes cannot be learned.

Codes cannot be learned at [MASTER VOLUME] or [MUTE] when the main remote control unit is set to “TUNER”, “SAT TU”, “DTU”, “NET/USB” or “iPod”.

Operating the Main Remote Control Unit

Specifications Troubleshooting Information Control Remote zone-Multi Playback Settings Connections Started Getting

113