
The settings related to tone adjustment and volume can be made.
1In the zone mode for which you want to operate, press [MENU].
The ZONE2 or ZONE3 menu is displayed on the ZONE2 monitor.
| MENU | ZONE2 |
|
|
|
|
|
|
|
|
| ZONE2 |
| ||
INPUT :SAT/CBL |
| MENU |
| ||||
SIGNAL:ANALOG |
| >Channel | STEREO | ||||
| |||||||
|
|
|
| Vol.Disp | Relative | ||
>Bass | 0dB | Vol.Lev. | - VAR - | ||||
Treble | 0dB | Vol.Limit | |||||
HPF | OFF | P.On Lev. | LAST | ||||
Lch Lev. | 0dB | Mute Lev. | FULL | ||||
Rch Lev. | 0dB |
|
|
|
|
2Press uio p to select the menu to be set or operated.
3 Press [MENU] to enter the setting. The
For ZONE2, the “Zone Setup” can be made while watching the on- screen display.
Also, when ZONE3 is operated, the
It is also possible to save three settings for
1 Set the items below to the settings you want to save. q Input Source (vpage 106)
wVolume Level (vpage 106) (except for ZONE4)
2In the zone mode for which you want to operate, press and hold the desired [QUICK SELECT] until “Memory” appears on the
display.
The current settings will be memorized.
GQuick Select DefaultsH
| Input Source | Volume |
Z2/Z3/Z4 Quick Select 1 | DVD | |
Z2/Z3/Z4 Quick Select 2 | SAT/CBL | |
Z2/Z3 Quick Select 3 | VCR | |
Z4 Quick Select 3 | DVR |
Calling the Settings Out
Press [QUICK SELECT] at which the settings you want to call out are saved.
nNaming Quick Select settings
See “Quick Select Name” (vpage 55).
This is useful when you want to sleep while listening in ZONE2 or ZONE3.
In ZONE4, the power switches off by interfacing with the MAIN ZONE sleep timer settings.
1Press [MAIN] to display the mode for the zone to be operated.
2 Press [SLEEP] and display the time you want to set. The time switches as shown below each time [SLEEP] is
pressed.
| OFF |
|
| 120 min |
| 90 min |
| |||
|
| 30 min |
|
| 60 min |
|
| |||
|
|
|
|
|
|
nTo cancel the sleep timer
Press [SLEEP] to set “OFF”.
The sleep timer is also canceled when the
Information Control Remote
•In ZONE4, only input sources to which XM, HD Radio, NET/USB and digital input have been assigned can be selected.
•Use the sub remote control when performing Quick Select memory or
Specifications Troubleshooting
107