Switching Zones

Use this procedure to select the zone to be operated by the sub remote control unit.

1 Press [ZONE SELECT].

The currently selected multi-zone indicator lights.

2While the multi-zone indicator is light, press [ZONESELECT] to select the zone to be operated.

The currently selected multi-zone indicator lights.

Switching the Multi-zone Input Source to the Same Input Source as Used in the

MAIN ZONE

This function is convenient for example when you want to listen to the same song as the one playing in the MAIN ZONE while in a different zone.

1Press [ZONE SELECT] and set to ZONE2, ZONE3 or ZONE4.

The currently selected multi-zone indicator lights.

2 Press [M.ZONE CALL] on the sub remote control unit. The multi-zone input source switches to the MAIN ZONE’s input source.

NOTE

•This cannot be used for the MAIN ZONE.

•When [M.ZONE CALL] is pressed while the multi-zone power is off, the multi-zone power turns on and the input source switches to the MAIN ZONE’s input source.

Setting the Zone for Which the Sub Remote Control Unit is Used (ZONE SELECT LOCK Mode)

We recommend always using the sub remote control unit for the same room. When this is done, the unit can be set so that the zone does not switch when buttons are operated.

1 Use the tip of a pen to press [ADVANCED SETUP]. All the multi-zone indicators light.

2 Select the multi-zone to be set. The selected multi-zone indicator lights.

qTo set to “MAIN ZONE” : Press [REPEAT].

w To set to “ZONE2”

: Press [RANDOM].

e To set to “ZONE3”

: Press [USB].

r To set to “ZONE4”

: Press [ALL MUSIC/FAVORITES].

3 Use the tip of a pen to press [ADVANCED SETUP]. The multi-zone indicator turns off.

To Cancel

1 Use the tip of a pen to press [ADVANCED SETUP]. The currently selected multi-zone indicator lights.

2 Press [ZONE SELECT].

All the multi-zone indicators light.

3 Use the tip of a pen to press [ADVANCED SETUP]. The multi-zone indicator turns off.

Operating the Sub Remote Control Unit

Setting the Remote ID

When using multiple DENON AV receivers in the same room, make this setting so that no AV receiver other than the desired one operates.

1While pressing [MENU], press [ADVANCED SETUP]with the tip of a pen.

The multi-zone indicator corresponding to the currently selected remote ID flashes.

2Select the remote ID to be set.

qTo set to 1 : Press [REPEAT]. The “M” indicator flashes.

wTo set to 2 : Press [RANDOM]. The “Z2” indicator flashes.

eTo set to 3 : Press [USB]. The “Z3” indicator flashes.

rTo set to 4 : Press [ALL MUSIC/FAVORITES]. The “Z4” indicator flashes.

3While pressing [MENU], press [ADVANCED SETUP] with the tip of a pen.

The multi-zone indicator turns off.

NOTE

When changing a setting, be sure to set the same remote ID as the AVR-4810CI’s (vpage 55).

Resetting the Settings

While pressing [ZONE OFF], press [ADVANCED SETUP] with the tip of a pen.

All the multi-zone indicators flash 4 times, then all the settings are restored to their defaults.

Specifications Troubleshooting Information Control Remote zone-Multi Playback Settings Connections Started Getting

119